Band Pass Filter</p> From 92.4MHz to 112.4MHz-Band Pass Filter-enrichtek

首页 >> Products >> Band Pass Filter

Band Pass Filter

From 92.4MHz to 112.4MHz

Brand :ENRICHTEK

P/N :EBP-E092-E112

MOQ :1

REQUEST QUOTE

ENRICHTEK 's band pass filters are used to eliminate unwanted side bands and remove spurious interference and noise.

The frequency of this LC band pass filter EBP-E092-E112 is from 92.4MHz to 112.4MHz with a 20MHz bandwidth, the maximum handing power is 1 Watt(CW)

With a 50 Ohm impedance, the VSWR of this LC band pass filter EBP-E092-E112 is less than 1.4.

The insertion loss of this LC band pass filter EBP-E092-E112 is less than 3.0dB and the passband ripple is less than 1.0dB.

The rejection at DC-80MHz and 125MHz-500MHz is greater than 40dB.

The LC band pass filter EBP-E092-E112 has been tested and proven as all our standard RF filter products.

With wide operating temperature, high stability and consistency, ENRICHTEK’s RF filters are wildly used in education, industry, aviation.

ENRICHTEK provides band pass filter design service, such as changing the electrical parameters, the cutoff frequency, mechanical structure, or connectors etc.

Electrical Specifications

Description	Typical
Frequency	92.4-112.4MHz
Bandwidth	20MHz
Impedance	50Ohms
Passband Insertion Loss	3.0dB Max.
Passband Ripple	<1.0dB
VSWR	1.4:1 Max
Rejection 1	DC-80MHz>40dB
Rejection 2	125-500MHz>40dB
Power Handling	1(CW)

Mechanical Specifications

Dimensions	40x12x10(mm)
Connectors	SMA-Female

Environmental Specifications

Operating Temperature	-45 to +75ºC
Storage Temperature	-55 to +80 ºC

Typical Performance

92.4~112.4MHz Band Pass Filter.png

Outline Drawing (unit: mm)

92.4~112.4MHz Band Pass Filter9.png

ature