Band Pass Filter</p> From 3.2GHz to 4.2GHz-Band Pass Filter-enrichtek

首页 >> Products >> Band Pass Filter

Band Pass Filter

From 3.2GHz to 4.2GHz

Brand :ENRICHTEK

P/N :EBP-3E2-4E2

MOQ :1

REQUEST QUOTE

Band pass filter is a kind of RF filter used to eliminate unwanted side bands and remove spurious interference and noise.

The frequency of this interdigital band pass filter EBP-3E2-4E2 is from 3.2GHz to 4.2GHz with a 1GHz bandwidth, the maximum handing power is 2 Watt(CW)

With a 50 Ohm impedance, the VSWR of this band pass filter EBP-3E2-4E2 is less than 1.5.

The insertion loss of this band pass filter EBP-3E2-4E2 is less than 1.0dB.

The rejection is larger than 60dB@DC-2.9GHz and larger than 60dB@4.5-6.0GHz.

The band pass filter EBP-3E2-4E2 has been tested and proven as all our standard RF filter products.

With high performance, good stability and consistency, RF filters from ENRICHTEK are wildly used in education, industry and aviation.

ENRICHTEK provides band pass filter customization, such as changing the electrical parameters, the cutoff frequency, mechanical structure, or connectors etc.

Electrical Specifications

Parameters	Typical Value
Center Frequency	3.7GHz
Pass Band Bandwidth	1.0GHz (3.2～4.2GHz)
Pass Band Insertion Loss	≤1.0dB
Pass Band VSWR	≤1.5:1
Stop Band Attenuation	≥60dB @ F0±800MHz (DC～2.9GHz、4.5～6.0GHz)
Impedance	50 ohms
Power Handling	≤2W
Surface Finish	Black Paint
Net Weight	0.085 KG

Mechanical Specifications

Dimensions	77249mm
Connectors	SMA-Female

Environmental Specifications

Operating Temperature	-30 to +70ºC
Storage Temperature	-55 to +95 ºC

Typical Performance

3.2-4.2GHz Interdigital Band Pass Filter.png

Outline Drawing (unit: mm)

3.2~4.2GHz Band Pass Filter9.png

ature